#2016 equinox wipers not working driver#

If the problem is with the rear wiper system, getting to the wiper motor can be more difficult with far more trim to remove than with a front system. Simply, replace the culprit, and reassemble. Once exposed, you should be able to remove the motor from the transmission and check to see if the transmission is binding or if the motor is the culprit.

Generally speaking, you can reach the motor and transmission by removing the wiper arms, all the screws that hold the cowl beneath the wiper arms and the weather stripping. It is also possible that the spline on the post of the front wiper arms is stripped.

DonвЂ™t let the term transmission fill you with dread itвЂ™s simply a term for a multi-lever set of arms and hinges that turn the circular motion of the wiper motor into the side to side motion of the wiper arms. If you hear a grind coming from the wiper area, it could be a stripped gear in either the motor, the transmission or where the wiper arm splines to the wiper motor in the rear. If you hear a buzz, it could be a motor straining to move a jammed wiper transmission or a locked motor gear. In rear wiper systems with a single wiper, thereвЂ™s a single moving part, the wiper motor. In front wiper systems, there are two moving parts, the wiper motor and the wiper transmission. Why would windshield wipers stop working? The most likely reason a windshield wiper stops working is a blown fuse.If upon turning the switch, you hear either a buzzing or a noise coming from the wiper area but no movement of the windshield wipers, then it becomes likely that there is a mechanical problem. I use glass maintenance products that remove water and make night driving a ton easier, check them out here on the Car cleaning tools page. Tonight, when lifting the liftgate, there was a strong smell of - Answered by a verified Chevy Mechanic We use cookies to give you the best possible experience on our website.

Use antifreeze in windshield wiper wash bottle My rear wiper stopped working about a week ago.

You must log in or register to reply here. 3 G gpart Member 18 Equinox does not offer automatic rain sensing wipers. Auto Wipe in Reverse Gear When on and the front wiper is on, the rear wiper will automatically activate when the vehicle is shifted to R (Reverse).

Lift wipers off windshield when frost expected In Settings there is a setting for Auto Wipe in Reverse.

#2016 equinox wipers not working driver#

ThereвЂ™s not much you can do about that, but you can avoid problems with your wipers by following a few simple tips, most of which will be obvious. Compass display included in Driver Information Center (DIC) (Not available with (UE0) OnStar delete.) Console, center with armrest and concealed storage Cruise. Wiper link rods are pretty durable, but as cars get older the plastic bushings wear out and get brittle. Running the wipers on a dry windshield can cause the links to jump off, but the real problem is as you know a worn-out link rod socket bushing. The binding can cause the link rods to pop off. They work hard and can bind as they get older. The spindles are what the wiper arms are fixed to. Worn-out wiper blades wonвЂ™t slide across the windshield like new ones, that too puts a load on the rods. Many Late Model radios, computers, and modules are designed to work in conjunction with your cars VIN. This can cause the wipers to catch in extreme weather conditions. Wipers overlap as you know, but over time as the mechanism wears, the timing goes out. If your wiper blades wont activate, only work at one speed, move more slowly than they should, or stop short of their fully seated position, your wiper motor. Wiper blades that are too long can catch in each other and also ride over the window edge which will load up the link rods. When wipers are stuck to the windshield solid, turning them on as you can imagine just like packed snow, causes huge pressure on the plastic rod link bushings. YouвЂ™ll find when link rods jump off once, theyвЂ™ll keep jumping off.

Turning on the wipers to clear heavy snow will cause excess pressure on the link arm bushings. The plastic bushings simply wear out and refitting it may work for a while but eventually will need to be replaced. They are attached by a bushing, commonly a plastic socket on the link rod, a metal ball on the motor, and a wiper spindle. Link rods are attached to the wiper motor and also to the wiper spindles. The most common reason for the link rod jumping off is to wear and tear on the link rod plastic bushing.